Start Page



heatpack logo


HEATPACK (H2020) aims to develop and validate critical technology building blocks for enabling transformative packages for space applications with very low thermal resistance. Benefits will range from improved performance to increased components reliability & lifetime.

mmama logo


MMΑMA (Η2020) intends in the development of the technical characteristics with microwaves and high frequencies in the nano-level, see SMM (Scanning Microwave Microscopy), aiming to assist development and quality control of new generation nanostructured materials.

Αn ambitious project gathering a complementary characterization/modelling/materials/products set of European competences in the field of emerging energy products.

oasis logo


OASIS (H2020) project aims at fulfilling the market potential of nano-enabled multifunctional lightweight products by:
1. Gathering the manufacturing capacity of 12 pilot lines from nanoparticles to the final product.
2. Establishing a thorough service offer for associated technical & business development
3. Granting direct access to the whole ecosystem through a Single-Entry Point, for easier access especially for SMEs.
The vision of OASIS is an ecosystem of 12 nanotechnology manufacturing pilot lines, operating under a common and demanding umbrella of Sustainable Production.
It aims at ensuring a competitive, quality, safe and environmentally friendly production of nano-enabled products in compliance with the applicable regulation.

mohito plus logo


MOHITO+ (Ε.Δ.Κ) is a national project aiming to expand the capabilities of the FXplyTM Pilot Line, by developing new processing modules for surface treatment, deposition, and functionalization of prepregs, textiles, and films. MOHITO+ aims to develop different methods for the functionalization of textiles and films targeting to new properties and functionalities, as well as their processing for use in new applications.

pretzel logo


PRETZEL (H2020) develops in novel polymeric membranes for electrolyte fuel cells (PEMEL) manufacturing, which will enable sizeable increases in efficiency and functionality satisfying the market need.
An innovative polymer electrolyte membrane electrolyzer (PEMEL) that provides significant improvements in efficiency and operability to satisfy emerging market requirements, is urgently needed for the increased demands of the grid balancing services.
In this context, PRETZEL is offering breakthrough technologies for becoming game changer in the field of water electrolyzers. First tasks on cell development and pressure housing have been accomplished and components specifications and optimization were discussed as a critical point of the project.
An important objective of PRETZEL project is to test and integrate the hydraulic compression technology, already tested in the laboratory scale, under real working conditions which is necessary for commercialization.

recomlabs logo


RECOMLABS (Prefecture of Western Greece) aims to develop multifunctional sandwich panels made from fiber-reinforced composites as building materials for application in the construction sector. RECOMLABS gathers up a team of six organizations, three from Western Greece and three from Romania, with more than fifteen years of active participation in EU, national and intranational research projects, which are linked with the fields of nanotechnology of composite materials, mainly for space applications.



TQMNANO (Prefecture of Western Greece) aims to manufacture nano-reinforced products (pre-impregnated fabrics modified with carbon nanotubes and CNTs bucky papers) with traceable quality control.

repair 3D logo


REPAIR3D (H2020) aims at the development of innovative reclamation and repurposing routes for end-of-life plastic and carbon fiber reinforced polymer (CFRP) components.

This will be achieved by employing advanced nanotechnology solutions, Additive Manufacturing (AM) and recycled resources, for the production of high added value 3D printed products with advanced functionalities.

hitec logo


HITEC (ESA) is a project involving both Greek and German partners and deals with the nano-enabling technologies for composites maturing at ADAMANT COMPOSITES Ltd. The scope of the project is to consolidate the materials and processes towards delivering integrated satellite panels, ideally with improved properties through nanotechnology.

lagard logo


LAGARD is one of the largest ESA projects in Greece. It involves the development of Large Lightweight Stable Deployable Structures with flexible and modular design to match the needs of future science missions.

spacenanoweld logo


SPACENANOWELD (ΕSA) is a project led by AMADEMA from Cyprus. It investigates the use of AMADEMA's NanoweldR technology for composites in space structures. ADAMANT COMPOSITES Ltd is a subcontractor contributing to the definition of relevant space application, supporting the materials and processes for thermoplastic prepreg, and producing the CFRP parts for the project.

Thorax-D logo


Thorax-D aims at the development of soft and hard lightweight textiles for military and civil protection applications. The development of such textiles is a challenge since protection of military and security forces, as well as individuals is critical in modern societies.
THORAX-D (project code: Τ6ΥΒΠ-00014) is co-financed by the European Regional Development Fund of the European Union and national resources through the Competitiveness, Entrepreneurship & Innovation (ΕΠΑνΕΚ 2014-2020) within the framework of the Action of National Scope «Special Actions "Aquaculture" - "Industrial Materials" - "Open Innovation in Culture"»

banana project logo espa


ΒΑΝΑΝΑ (Ε.Δ.Κ.) aims at the design compact, efficient, low-cost, user- and environmentally friendly energy storage and power systems with new generation sodium ion batteries (SIBs), based on biochars. Naturally derived cane will be used for the production of biochar. Canes are abundant in Greece and is an ideal ecological raw material for the production of hard coal, suitable for SIBs.

A research project implemented within the framework of the action "RESEARCH - CREATE - INNOVATE" with the co-financing of the European Regional Development Fund (ERDF) of the European Union and national resources through the E.P. Competitiveness, Entrepreneurship & Innovation (EPANEK) (project code: Τ2ΕΔΚ-03222).

CA3ViAR logo


The aim of the Composite fan Aerodynamic, Aeroelastic, and Aeroacoustic VAlidation Rig (CA3ViAR) project is the design of a Low-Speed Fan (LSF) that will develop instabilities, which are representative for fans in ultra-high-bypass-ratio (UHBR) engines of civil aircraft. During the project, extensive experimental tests to measure aerodynamic, aeroelastic and aeroacoustic performance under a wide range of operating conditions will be performed. The resulting models, data and documents will be published as an open test case, which is unique in engine fan research.

GBMinAIRS project logo


GBMinAIRS is an innovative project that aims to take advantage from the electrical, thermal, and impermeable properties of graphene-based materials (GBMs), and exploits the benefits of using them in composite aeronautical structures. More specifically, the project proposes the design, manufacturing and testing of a multilayer composite structure where each separate part will contain different types of GBMs. The selection of the dimensional characteristics of the nanofillers to be incorporated in the proposed structure should reflect the targeted composite properties. The composite expects to improve mechanical properties and provide solutions in other important functional issues such as thermal de-icing, lightning strike protection, fire barrier, and water absorption.

  Patras: Aghias Lavras and Stadiou street, Patras, 26504 Platani, Rio, Achaia-Greece

  Telephone: +30 2610 931730      Fax: +30 2610 931 727

  Email: info@adamant-composites.com


Copyright © 2021 - 2024 Adamant Composites Ltd.